Abstract: With the development of the electrical industry, the requirements for the safety and reliability of equipment are getting higher and higher. Under this condition, a wireless temperature measurement system for high-voltage equipment came into being. It is to install temperature sensors with batteries or CT powered at each temperature measurement point. The sensor sends the temperature measurement data to the receiving unit, and the receiver can be connected to the system to realize the electrical temperature monitoring. This article introduces the application of Acrel wireless temperature measurement products in Beijing Daxing International Airport.
Keywords: Wireless Temperature Sensor, Online Temperature Monitoring System, High-voltage Switchgear
1.Project Overview
As a large international transportation hub, Beijing Daxing International Airport is located between Beijing Daxing District and Guangyang District, Langfang City, Hebei Province. The airport terminal high-voltage substation includes 668 high-voltage cabinets. Acrel provided it with a wireless temperature measurement solution. The upper and lower contacts and cable joints of each high-voltage cabinet were tested at 9 points. There were a total of 6015 wireless temperature sensors. At the same time, it should be installed an ASD320 intelligent control device on each high-voltage cabinet.
2.Introduction of Wireless Temperature Measurement Products
Wireless temperature measurement products are suitable for temperature monitoring of cable joints, circuit breaker contacts, copper bars, cables, and equipment surfaces in medium-voltage and low-voltage switchgear, and reflect the operating status of equipment in a timely, continuous and accurate manner to improve the safety on equipment.
3.Introduction of Acrel Wireless Temperature Measurement Solution
3.1 Solution for High-voltage and Low-voltage Switchgear (With display)
3.2 Solution for High-voltage and Low-voltage Switchgear (Without display)
4.Product Selection
4.1 Wireless Temperature Sensor
|
Model |
Product |
Technical Parameters |
Installation |
|
|
Battery operated sensor, 32.4*32.4*16mm, -50℃~+125℃, Accuracy: ±1℃， 470MHz, 150 meters in an open space |
Magnetic |
|
|
|
Battery operated sensor, 62.4*32.4*16mm, -50℃~+125℃, Accuracy: ±1℃， 470MHz, 150 meters in an open space |
Screwed |
|
|
|
Battery operated sensor, 35*35*17mm, -50℃~+125℃, Accuracy: ±1℃， 470MHz, 150 meters in an open space |
Bundled |
|
|
ATE100P |
|
Battery operated sensor, 62.4*32.4*16mm, -50℃~+150℃, Accuracy: ±0.5℃， 470MHz, 150 meters in an open space, IP68 |
Screwed (Outdoor) |
|
ATE200P |
|
Battery operated sensor, 35*35*17mm, -50℃~+150℃, Accuracy: ±0.5℃， 470MHz, 150 meters in an open space, IP68 |
Bundled (Outdoor) |
|
|
CT powered sensor, 25.82*20.42*12.8mm, Current: ≥5A, three colors, 470MHz, 150 meters in an open space |
Fixed by alloy strap |
4.2 Receiver and Display Unit
|
Model |
Product |
Function |
|
|
Power supply: DC 24V, Installation: 35mm DIN rail/ Screwed, Dimension: 65*45*28mm, Communication: RS485(Modbus-RTU), Receive the data of 60 sensors. |
|
|
|
Power supply: AC/DC 110V/220V, Installation: 35mm DIN rail, Communication: RS485(Modbus-RTU), Alarm: 2DO Receive the data of 240 sensors. |
|
|
|
Power supply: AC85-265V/DC100-300V, Installation: panel mounted, 92*92mm, Dimension: 96*96*17mm, Communication: RS485(Modbus-RTU), Receive the data of 60 sensors. |
5.Structure
6.Installation Photos
Bibliography
1.Acrel Solutions for Enterprise Micro-grid System. 2020
2. IEC 60255-26: 2013, IDT Measuring relays and protection equipment-Part 26: Electromagnetic compatibility requirements. 2013
3.IEC 60255-27:2005, MOD Measuring relays and protection equipment Part 27: Product safety requirements-Part 27: Product Safety requirements. 2005
